ZALMAN CNPS9900DF Manual de usuario descargar pdf (Pagina 8)

.COM

④

Attach the Backplate assembly to the

back side of the motherboard by aligning

the Nuts to the motherboard mounting

holes. If you were unsuccessful at rst

attempt, you may continue with the

installation without the Double-sided Tape

as it is not a necessary component.

M/B

Gold Bolt

(Socket 1366)

Sliver Bolt B (3mm)

(Socket 1156/1155/775)

⑤

Apply thermal grease just enough to thinly cover the CPU surface. Then,

insert four Silver Bolts B (for socket LGA 1156/1155/775) or Gold Bolts (for

LGA 1366) through the Intel Clip holes, and using the 3/32” Allen Wrench,

fasten the Bolts incrementally while alternating between them.

Please make sure to use the

Bolts with correct color and

thread length as they can

appear quite similar.

Gold Bolts

(Socket 1366)

Sliver Bolts A (4mm)

(Socket 2011)

Sliver Bolts B (3mm)

(Socket 1156/1155/

775/AMD)

Caution

Wrench

Please make sure that PWM Control Mode is activated in the motherboard’s BIOS settings.

Beware of fan wire interuption

Caution

⑥

Connect the Y-Connector Cable to the 4Pin(140mm Center FAN), 3pin (120mm

Front FAN) .

⑦

Connect the Y-Connector Cable to the mother board.

M/B

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

ZALMAN CNPS9900DF Manual de usuario Pagina 8